83-TRD-015
In Stock: 266
Deep Embossed Matt
£37.69/M2 ex VAT
6 x 120 x 600 mm | 1.44m2 | 70 packs per pallet
Easiloc
Floated
Suitable for UFH
Built-in Underlay
Waterproof
20 Year Warranty
Create a warm, natural look with these high-performance, waterproof 6x120mm wood-design herringbone boards. Earthy tones with white limed details highlight the grain, enhancing the floor’s texture and depth. The built-in underlay ensures comfort, while Easiloc joints provide easy, speedy fitting. Guaranteed for 20 years of lasting beauty. Also available in matching plank.
| Joint Type |
Easiloc |
| Fitting method |
Floated |
| Underfloor Heating |
Suitable for UFH |
| Tog Rating |
0.5 |
| Underlay |
Built-in Underlay |
| Slip Resistance |
R10 |
| Wear Rating |
AC4 |
| Waterproof? |
Waterproof |
| Floor Thickness |
6mm |
| Plank Width |
120mm |
| Plank Length |
600mm |
| Pack size |
1.44m2 |
| Planks per pack |
20 |
| Packs per pallet |
70 |
| Structure |
Stratex® |
| Floor Style |
Herringbone |
| Core Material |
Natural Mineral / Resin Composite |
| Finish |
Deep Emboss |
| Hardness |
Hard |
| Saw Marks |
No |
| Bevel Type |
Micro |
| Warranty |
20 Year Warranty |
We guarantee all our Woodpecker Trade floors for 20 years. Please click the button below to fill in your details and register your floor's warranty.
Register WarrantyYes – we recommend you let your flooring acclimatise for at least 24 hours before installing. This must be in the same room that it will be installed in, and it should remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.
The surface immediately beneath a Woodpecker floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause Stratex® flooring to distort.
Not in normal living conditions (temperatures of 15-25°C). However, allow a gap of 2-3mm for Stratex® floors where there is likely to be temperature variation beyond normal living conditions. Eg. conservatories
Cleaning kits for lacquered floors are suitable for your Stratex® floor to keep them shining, alternatively use a well wrung damp mop.
No – Stratex® floors have built-in underlay therefore additional underlay should not be used. This can create additional bounce which can damage the joints. If you need to raise the height of the floor then we recommend using plywood.
Innovate and Craft are wood-design flooring. Quarry and Whitby are stone-design flooring. As a result, Stratex® is waterproof. It has a stable mineral composite core and a resilient vinyl.
No – whilst Stratex® is waterproof, long exposure to continuous water is not recommended, therefore bathrooms are fine but wet rooms would not be suitable.
Yes – you can use this floor with underfloor heating.
This floor has Easiloc/click-joints.
This floor should only be floated.
The wear rating for Stratex® is AC4.
Stratex® has a slip resistance of R10.
Stratex® is 6mm thick.
1.44m2 per pack
83-TRD-015
6 x 120 x 600 mm
£37.69/M2 ex VAT
