83-TRD-016
Stock Last Updated 29/10/2025 In Stock: 146 packs
Craft Fall Oak Herringbone
Deep Embossed Matt
£37.69/M2 ex VAT
6 x 120 x 600 mm | 1.44m2 | 70 packs per pallet
Easiloc
Floated
Suitable for UFH
Built-in Underlay
Waterproof
20 Year Warranty
- Joint - Easiloc
- Structure - Stratex®
- Fitting - Floated
Add sophistication to any room with these high-performance, waterproof 6x120mm wood-design herringbone boards. Featuring subtle red oak tones, they exude natural elegance. Built-in underlay ensures comfort, while patented Easiloc joints with score & click fitting enable seamless installation. Backed by a 20-year guarantee for peace of mind. Also available in matching plank.
| Joint Type |
Easiloc |
| Fitting method |
Floated |
| Underfloor Heating |
Suitable for UFH |
| Tog Rating |
0.5 |
| Underlay |
Built-in Underlay |
| Slip Resistance |
R10 |
| Wear Rating |
AC4 |
| Waterproof? |
Waterproof |
| Floor Thickness |
6mm |
| Plank Width |
120mm |
| Plank Length |
600mm |
| Pack size |
1.44m2 |
| Planks per pack |
20 |
| Packs per pallet |
70 |
| Structure |
Stratex® |
| Floor Style |
Herringbone |
| Core Material |
Natural Mineral / Resin Composite |
| Finish |
Deep Emboss |
| Hardness |
Hard |
| Saw Marks |
No |
| Bevel Type |
Micro |
| Warranty |
20 Year Warranty |
We guarantee all our Woodpecker Trade floors for 20 years. Please click the button below to fill in your details and register your floor's warranty.
Register WarrantyDoes my Stratex® floor need to acclimatise before installing?
Yes – we recommend you let your flooring acclimatise for at least 24 hours before installing. This must be in the same room that it will be installed in, and it should remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.
What condition should the subfloor be in?
The surface immediately beneath a Woodpecker floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause Stratex® flooring to distort.
Do I need to leave an expansion gap for my Stratex® floor?
Not in normal living conditions (temperatures of 15-25°C). However, allow a gap of 2-3mm for Stratex® floors where there is likely to be temperature variation beyond normal living conditions. Eg. conservatories
How do I clean my Stratex® floor?
Cleaning kits for lacquered floors are suitable for your Stratex® floor to keep them shining, alternatively use a well wrung damp mop.
Do I need additional underlay with my Stratex® floor?
No – Stratex® floors have built-in underlay therefore additional underlay should not be used. This can create additional bounce which can damage the joints. If you need to raise the height of the floor then we recommend using plywood.
Are the Stratex® ranges wood-effect or real wood?
Innovate and Craft are wood-design flooring. Quarry and Whitby are stone-design flooring. As a result, Stratex® is waterproof. It has a stable mineral composite core and a resilient vinyl.
Can I use Stratex® flooring in a wet room?
No – whilst Stratex® is waterproof, long exposure to continuous water is not recommended, therefore bathrooms are fine but wet rooms would not be suitable.
Can I use this floor with underfloor heating?
Yes – you can use this floor with underfloor heating.
What type of joint does this floor have?
This floor has Easiloc/click-joints.
How can this floor be laid?
This floor should only be floated.
What is the wear rating for Stratex® flooring?
The wear rating for Stratex® is AC4.
What slip resistance rating does Stratex® have?
Stratex® has a slip resistance of R10.
How thick is Stratex® flooring?
Stratex® is 6mm thick.
Useful Links
Explore The Range
Craft Thatch Oak Herringbone
1.44m2 per pack
83-TRD-015
6 x 120 x 600 mm
£37.69/M2 ex VAT
What Our Customers Say
Get In Touch
