Grande Copper Oak

Yes – we recommend you let your Grande floor acclimatise for 3 to 4 days before installing. This needs to be in the same room that it will be installed in, and it needs to remain within the sealed packaging. The sealed packaging helps ensure the floor doesn’t warp with the change of temperature from different environments. Do not store the flooring outdoors, in an outbuilding, or anywhere with damp or condensation problems.

The surface immediately beneath a Woodpecker natural wood floor must be in good structural condition, free from damp rot, fungal or insect infestation, and contaminating residues. It must be flat with uneven areas not exceeding 3mm over a 2m area. Naturally, the surface should be vacuumed and totally free of debris before fitting begins. Hot pipes should be well insulated to prevent localised hotspots, which can cause wood flooring to warp or shrink.

Grande flooring is 21mm thick, including a 6mm real oak wear layer.

As wood is a natural substance, it will expand and contract with changes in temperature and humidity. That’s why when a wood floor is fitted, expansion gaps need to be left wherever the boards meet a wall, structural support, stairs, breakfast bar, fireplace, central heating pipe…etc. Gaps must also be considered at doorways to allow for the differing expansion between rooms. Place spacers at regular intervals when fitting and then remove them before skirting boards, beading or trims are put in place. Allow a 2mm gap for every metre span of the floor with a minimum of 10-15mm gap regardless. For areas over 5m in width, extra provisions should be made for expansion.

Colour variation is the natural beauty and variations in colour that occur in real wood. To ensure the overall effect has a good balance of colour and details, take care to blend planks from several packs across the entire room.

Yes – but only if it is fully stuck down.

You can float, glue or secret nail Grande flooring.

Grande flooring has tongue and groove joints.

We generally wouldn’t recommend using engineered flooring in a bathroom.

This means that at least one plank within your pack will be cut in half. This is intentional as it will help spread the joints out across your floor, thus helping prevent weakening. The other planks will be the same length.

We generally recommend 10% wastage, however, this can be impacted by the room shape, laying style and other factors so always check with your installer first.

EasiOil is a UV cured oil. 5-7 coats of oil are cured to create a harder and more durable finish. • EASY TO CHOOSE - you can be confident that we’ve selected the best finish for these floors. • EASY TO SPECIFY – you can be confident your clients will be delighted with the durable and practical finish. • EASY TO MAINTAIN – your clients can be confident that their floors can withstand the stresses of modern life with minimal maintenance.